Corrosion Resistant Stainless Steel Material Conduction Oil Heating
Various Hazardous Wastes Melting Plant
Description
Drummed corrosive material melter is composed of melting tank,
lifting device, tipping device, hydraulic propelling system, heat
transfer oil heating system, stainless steel pump and pipeline,
liquid level warning system and electric control system, etc.
Drummed corrosive material melter lifting device adopt suspension
structure, which lift the barrel with electric hoist and load it
onto the tipping device. The tipping device then turn over the
barrel bottom up on the rails pallet, and the hydraulic propelling
system will push it into up tank. All the mentioned actions are
operated on the integrated electric controller.
The melting tank looks like a container, its chamber is consist of
upper half and bottom half. The upper half is applied to heat up
the drums with heat transfer oil coils, and make material outflow
from the drums. Hydraulic propelling system push the barreled
material into tank via two rails, the newly entered barrel pushed
empty barrel out from the other end. The bottom half is a storage
tank with heat transfer oil coil for heating and storing hot
liquid. Finally pump the liquid into another storage thank or
application machine when liquid temperature arrive 110 degree.
Melting plant components
The equipment mainly consists of melting tank, lifting system,
tipping devices, drum plate, dripping liquid collect system,
hydraulic propulsion system, thermal oil heating system, liquid
pump, pipe system, and electric control system.
Working principle
The equipment adopts automatic spring door sealed box structure.
The drum is lifted by electrical hoisting. The hydraulic propeller
pushes drum plate into the melter, and using the hot thermal oil
from external boiler as the heating source.
Continuous production one full drum in and one empty drum out from
the other end.
Features
1. Drum lifting
Lift the barrel by hoist, move the barrel transversely and put it
on the turnover device with opening up. No dripping, no pollution.
2. Drum turnover device
In the previous time, after opening the barrel, we need to turn
over the barrel by manual and liquid dripping results in waste and
pollution when move the barrel with opening down to the sling way.
But our machine adopt the barrel turnover technology invented by
ourselves, the machine drastically reduces the labor intensity and
avoids dripping during transferring.
3. Collecting disk
After the barrel turned over by the turnover device, a few of
liquid dripping from the barrel will be collected by the bottom
disk and spilled into the melting tank automatically through a
small hole.
4. Barrel plate
The hydraulic pusher does NOT push the barrel directly, but push
the barrel plate with square shape, avoiding big resistance,
unsatisfactory progress and deformation of barrel and rail.
| Model | FT-3 | FT-5 | FT-10 | FT-15 |
| Production capacity (t/h) | 3 | 5 | 10 | 15 |
| Tank capacity (m3) | 8 | 10 | 15 | 20 |
| Drum quantity | 14 | 18 | 28 | 42 |
| Number of drum rails | 2 | 2 | 2 | 3 |
| Dimension (L x W x H) (m) | 7.9×2.2×2.55 | 9.1×2.2×2.55 | 12×2.2×2.55 | 12×2.8×2.55 |
| Total power (kW) | 15 | 15 | 17 | 17 |
| Thermal oil heater capacity (Kcal/hr) | 400,000 | 400,000 | 600,000 | 800,000 |
Our advantages
Our factory, DEZHOU FEITENG ROAD CONSTRUCTION EQUIPMENT CO., LTD.,
specializes in designing and manufacturing asphalt equipment,
mainly including asphalt melting equipment for drum/box/bag
packing, asphalt tank, asphalt emulsion equipment and asphalt
sprayer, also we have the big advantages as below,
1. Independent design and professional manufacturer.
2. Production capacity over 200 sets per year.
3. All equipments with compact structure, suitable for container
load.
4. Select premium steel with high quality.
5. Complete production control with detailed record and video.
6. Our factory had passed ISO system authentication, including
ISO9001, ISO 14001, OHSAS18001.
7. We manufacture our standard equipment, also welcome OEM and ODM.
Our service
Our factory, DEZHOU FEITENG ROAD CONSTRUCTION EQUIPMENT CO., LTD.,
specializes in designing and manufacturing asphalt equipment, you
may get as below,
1. Design drawing as your requirement
2. Equipment solution as your real condition
3. Quality equipment as your order
4. Quick response as your time
5. Fast delivery as your demand
6. Complete warranty as your expect
Quality product, quick response and cost saving.
Delivery and shipping
1. Production time around 5-15 days per set
2. Suitable for 40 HQ container loading
3. Trade terms EXW, FOB, CFR, CIF
After sale service
1. Warranty one year
2. Online support service and video technical support
3. Free spare parts
4. Field installation, commissioning and training, field
maintenance
