Steel Plate 5 Tons Per Hour Barrel DMF Rectification Residue
Melting Machine With High Density Rock Wool Insulation
Description
DMF Rectification residue melting machine is developed by us which
uses conduction oil as heating medium to heat, melt, dump and
dewater corrosive material.
Melting plant components
The equipment mainly consists of melting tank, lifting system,
tipping devices, drum plate, dripping liquid collect system,
hydraulic propulsion system, thermal oil heating system, liquid
pump, pipe system, and electric control system.
Working principle
The equipment adopts automatic spring door sealed box structure.
The drum is lifted by electrical hoisting. The hydraulic propeller
pushes drum plate into the melter, and using the hot thermal oil
from external boiler as the heating source.
Continuous production one full drum in and one empty drum out from
the other end.
Features
1. The drums loading operation is made by the electric lifting
system. The empty drums are pushed out on the back side.
2. The heating required to melt the corrosive material is provided
by heat conducting oil.
3. The equipment consists of upper and lower two rooms, the upper
one for melting the barrels, surrounded by evenly distributed
thermal oil coils, heating coils and the barrel mainly using the
thermal radiation heating mode to melt the corrosive material from
the barrels. The lower room is mainly for increasing the heating
temperature of the corrosive material that melted from the barrels
till reach to (110 degree), then liquid outlet pump will transfer
the corrosive material outside to be ready for use if extend the
heating time can be obtained a higher temperature to (160 degree).
4. Easy to put the barrels inside the equipment without any
platforms with high efficiency.
5. No need for trolley or any wrench to carry the barrel inside the
plant.
6. Simple structure, with automatic spring door, easy to maintain.
7. Environmental protection and good, enclosed structure, no
pollution.
8. Facilitate the relocation: container structure assembled
quickly.
| Model | FT-3 | FT-5 | FT-10 | FT-15 |
| Production capacity (t/h) | 3 | 5 | 10 | 15 |
| Tank capacity (m3) | 8 | 10 | 15 | 20 |
| Drum quantity | 14 | 18 | 28 | 42 |
| Number of drum rails | 2 | 2 | 2 | 3 |
| Dimension (L x W x H) (m) | 7.9×2.2×2.55 | 9.1×2.2×2.55 | 12×2.2×2.55 | 12×2.8×2.55 |
| Total power (kW) | 15 | 15 | 17 | 17 |
| Thermal oil heater capacity (Kcal/hr) | 400,000 | 400,000 | 600,000 | 800,000 |
Our advantages
Our factory, DEZHOU FEITENG ROAD CONSTRUCTION EQUIPMENT CO., LTD.,
specializes in designing and manufacturing asphalt equipment,
mainly including asphalt melting equipment for drum/box/bag
packing, asphalt tank, asphalt emulsion equipment and asphalt
sprayer, also we have the big advantages as below,
1. Independent design and professional manufacturer.
2. Production capacity over 200 sets per year.
3. All equipments with compact structure, suitable for container
load.
4. Select premium steel with high quality.
5. Complete production control with detailed record and video.
6. Our factory had passed ISO system authentication, including
ISO9001, ISO 14001, OHSAS18001.
7. We manufacture our standard equipment, also welcome OEM and ODM.
Our service
Our factory, DEZHOU FEITENG ROAD CONSTRUCTION EQUIPMENT CO., LTD.,
specializes in designing and manufacturing asphalt equipment, you
may get as below,
1. Design drawing as your requirement
2. Equipment solution as your real condition
3. Quality equipment as your order
4. Quick response as your time
5. Fast delivery as your demand
6. Complete warranty as your expect
Quality product, quick response and cost saving.
Delivery and shipping
1. Production time around 5-15 days per set
2. Suitable for 40 HQ container loading
3. Trade terms EXW, FOB, CFR, CIF
After sale service
1. Warranty one year
2. Online support service and video technical support
3. Free spare parts
4. Field installation, commissioning and training, field
maintenance
